Janitor AI is used to automate content moderation on digital platforms and websites. However, we have noticed that sometimes, it doesn’t load, work, or respond. In this post, we are going to see what you can do if the Janitor AI is not working for you.
Why isn’t my janitor AI working?
Janitor AI may not be working due to issues like poor internet connectivity, which prevents it from loading properly. Additionally, a corrupted browser cache or conflicting extensions could interfere with its functionality, stopping it from responding. VPN settings might also affect access by altering network routing, causing disruptions. In some cases, Janitor AI may be undergoing maintenance or facing high user traffic, leading to temporary unavailability.
Fix Janitor AI is not working on PC or Phone
If the Janitor AI is not working for you, follow the solutions mentioned below.
- Check your Internet connection
- Clear your browser’s cache
- Disable extension and VPN
- Try Incognito Mode or a different browser
- Wait for a bit
Before you begin, confirm if the Janitor AI server is up or down.
1] Check your Internet connection
One of the obvious reasons why Janitor AI will fail to load on your system is the lack of a proper Internet connection. We recommend you use one of the free Internet speed testers to determine the bandwidth. If the bandwidth is low, you can reboot your network device; if that fails, contact your ISP.
Read: Copilot not working in Edge; Attempting to reconnect
2] Clear your browser’s cache
Next up, we need you to clear your browser’s cache to ensure that corrupted caches are not the reason for this shortcoming. You can go ahead and clear the cache of your Edge, Chrome, or any other browser that you may have. Once done, check if the issue is resolved.
Read: Character AI not working or loading on PC or Mobile
3] Disable extensions and VPN
A third-party extension may interfere with the Janitor AI’s website, it can block or restrict some of its functionality. We recommend you disable the extensions and then try using the browser. It will do the job for you.
Similarly, a VPN can cause issues, too. It creates a tunnel for the network packets to travel to a different server. This can confuse the Janitor, as your profile will be created in your base location. So, go ahead and disable it. Finally, check if the issue is resolved.
If you are not connected to a VPN, you can try connecting to one too, as it is a workaround as well.
Read: Grok AI not working
4] Try Incognito Mode or a different browser
You could try using the browser in Incognito Mode and see.
You could also use a different browser and see if it works.
Read: How to use Meta AI in WhatsApp, Instagram or Facebook
5] Wait for a bit
If everything fails, you need to wait as there is no issue from your end. Janitor AI is most likely experiencing a surge in the number of active users or is going through some maintenance. In that case, all you can do is wait for the issue to be resolved.
Also Read: DeepSeek AI Assistant is not responding or working.
