If you encounter the “Memory configured incorrectly” error on system startup, the solutions provided in this article will help you. When you turn on your system, it performs the POST. If the system detects a hardware issue, it halts the boot process and displays the corresponding error message. Your system cannot boot into Windows until you fix this error.
The complete error message is:
Error! Memory configured incorrectly. Please enter setup for memory information details.
System halted!
Error! Memory configured incorrectly. System halted!
Use the following solutions if you cannot boot into Windows due to the “Memory configured incorrectly” error:
- Clean and reinstall RAM
- Clear CMOS
- Test your RAM sticks
- Decode the beep sound (if applicable)
- Verify the RAM configuration with the user manual
- Hardware fault
All these fixes are explained in detail below:
1] Clean and reinstall RAM
Dust accumulation can cause multiple performance and hardware-related issues in a computer. Your RAM sticks might be unable to make contact with the motherboard, due to which your system is showing this error. To confirm this, turn off your computer and open its case. Carefully remove the RAM sticks and clean them with a soft cloth. Also, clean the RAM slots. Now, reinstall the RAM sticks and turn on your system.
2] Clear CMOS
If you still encounter the error after cleaning the RAM, resetting the CMOS may help. Clearing the CMOS also resets your BIOS settings to the default. Therefore, if you can boot into BIOS, note down all the current BIOS settings before performing a CMOS reset. This will allow you to reapply the same BIOS settings.
Force shut down your computer and open its case. Locate the small coin-shaped battery. Gently pull it out of the socket and wait for a few minutes. Reinstall the battery with the right polarity. Now, turn on your system and see if the error occurs.
3] Test your RAM sticks
Your RAM might be faulty. If your system has more than one RAM stick, one of them might be faulty. If your system has only one RAM stick, you can test it by installing it on another working computer. However, in this case, the RAM should be compatible with that computer.
If you have multiple RAM sticks, remove all of them and boot your computer with one at a time. This troubleshooting process will take time, but help you identify whether your RAM is faulty.
4] Decode the beep sound (if applicable)
Do you hear a beep sound when you turn on your computer? If so, there might be a hardware fault causing this error. Motherboards are programmed to emit a beep whenever they detect a hardware issue. These beep codes differ by motherboard brand.
If you hear a beep sound, refer to the user manual of your motherboard to decode that beep code. This will let you know that the problem is associated with which hardware. Some motherboards also have LED indicators to show a hardware fault. Open your computer case and then turn on your computer. Check if any LED indicator on your motherboard turns on. If yes, troubleshoot the issue accordingly by referring to your motherboard’s user manual.
5] Verify the RAM configuration with the user manual
The error message indicates an issue with your RAM configuration. This usually happens when you install RAM incorrectly. To check this, refer to the user manual for your computer or motherboard.
6] Hardware fault
If none of these fixes resolve the issue, there may be a hardware fault in your system. The problem may be with your RAM sticks or the RAM slots. Take your computer to a professional computer repair shop for further assistance.
That’s it. I hope this helps.
How to fix the system halted error?
A halted error indicates your system cannot boot into Windows. When you turn on your system, it performs a POST. If any hardware issue is detected during the POST, your system halts, and the corresponding error message is displayed. A system halts due to multiple hardware problems or configuration issues. Read the message displayed on your screen and troubleshoot the issue accordingly.
How to fix memory errors on a PC?
To fix memory issues on your PC, first, you need to identify whether the problem is due to a software glitch or a hardware failure. You can use the Windows Memory Diagnostic Tool to test your RAM. Sometimes, memory issues occur due to incorrect configuration. In such cases, refer to your motherboard’s user manual and follow the correct RAM installation guidelines. Additionally, RAM issues also occur due to dust build-up.
Read next: The amount of system memory has changed error when turning on computer.
